Spray Nozzles

Features

HE-VAN’s even coverage allows you to shorten run times by up to 35%, saving you water and money, while still maintaining a healthy lawn
HE-VAN has more than a 40 percent even-coverage improvement over existing variable arc nozzles
HE-VAN nozzles have a unique stream pattern, designed for superior coverage and wind resistance
Low-trajectory spray and large water droplets prevent misting and airborne evaporation, so the right amount of water is delivered to the right place
Gentle close-in watering eliminates dry spots around the spray head
HE-VAN nozzles throw to the exact specified radius, delivering the cleanest edge of any VAN on the market today
Reduced zone run times, compared to competitive nozzles, help stay within tight watering windows, conserve water, and save money
With full adjustability from 0° to 360°, you'll be able to efficiently water landscapes of all shapes, while saving time and stocking fewer nozzles
Matched precipitation rates allow you to install Rain Bird HE-VAN, MPR, and U-Series nozzles on the same zone
HE-VAN nozzles have a tactile click to keep the arc setting from drifting over time
Three-year trade warranty

Specifications

Spacing: 6 to 15 feet (1.8 to 4.6 m)*
Pressure: 15 to 30 psi (1.0 to 2.1 bar)
Optimum pressure: 30 psi (2.1 bar)**
* These ranges are based on proper pressure at nozzle
** Rain Bird recommends using 1800/RD1800 PRS Spray Bodies to maintain optimum nozzle performance in higher pressure situations
Efficiency Ratings
Rain Bird HE-VAN Nozzles deliver an average DULQ of 70%, more than a 40% improvement over typical variable arc spray nozzles
Rain Bird HE-VAN Nozzles deliver a SC less than or equal to 1.6, which is 35% lower than the typical variable arc spray nozzle

Model Listing

  • HE-VAN-8: 6 to 8 feet (1.8 m to 2.4 m)
  • HE-VAN-10: 8 to 10 feet (2.4 m to 3.0 m)
  • HE-VAN-12: 10 to 12 feet (3.0 m to 3.7 m)
  • HE-VAN-15: 12 to 15 feet (3.7 m to 4.6 m)
  • Features

    Additional orifice for close-in watering minimizes brown spots around the spray head and eliminates gaps in coverage so the entire watering area is more uniformly covered
    Superior coverage for efficient watering. Use up to 30% less water
    Matched precipitation rate with Rain Bird HE-VAN and MPR nozzle
    Five-year trade warranty

    Specifications

    Spacing: 5 to 15 feet (1.7 to 4.6 m)*
    Pressure: 15 to 30 psi (1.0 to 2.1 bar)
    Optimum pressure: 30 psi (2.1 bar)**
    * These ranges are based on proper pressure at nozzle
    ** Rain Bird recommends using 1800/RD1800 PRS Spray Bodies to maintain optimum nozzle performance in higher pressure situations

    Model Listing

  • U-8 Series: 8-foot Quarter, Half, Full nozzles
  • U-10 Series: 10-foot Quarter, Half, Full nozzles
  • U-12 Series: 12-foot Quarter, Half, Full nozzles
  • U-15 Series: 15-foot Quarter, Half, Full nozzles
  • Features

    Precision and Efficiency

    • Perfect for small areas - Use for difficult corners in narrow planting beds, parking lot islands, walkways, parkways, street medians, and around trees and shrubs.
    • Pressure compensating and virtually mist-free – Ensure optimum coverage for non-turf applications from 20 to 50 psi, even at the maximum operating pressure.
    • Water Saving - Meets micro irrigation system requirement with less than 26 gph flow rate at 30 psi.

    Versatile Installation

    • Simplify designs and installations - Square patterns create flexibility for use in a variety of applications
    • Use in a variety of applications - Different patterns provide solutions for different placement and flow
    • Multiple ways to install a single product - Can be installed on a variety of spray heads and risers to address any of your irrigation projects.
    • Optional throw - Patented design  provides the designer and the installer with the option of 2.5' or 4' throws (0.8 m or 1.2 m)

    Savings on Material and Labor Costs

    • Fewer Nozzles Needed - Unique square pattern with edge-to-edge capability reduces need for overlap decreasing cost and installation time. 
    • Reduced liability - Pressure compensation offers increased efficiency and control, reducing overspray, and property damage.

    Specifications

    • Flow Rates: 6, 12, 18 and 24 gph
    • Operating Pressure: 20 to 50 psi
    • Required Filtration: 40 mesh

    Model Listing

    SQ Nozzle Models

  • SQ QTR: SQ Nozzle, quarter pattern
  • SQ HLF: SQ Nozzle, half pattern
  • SQ 3QTR: SQ Nozzle, 3 quarter pattern
  • SQ FUL: SQ Nozzle, full pattern