Specification Home
Products

Spray Bodies

Spray Nozzles

Rotors & Impacts

Valves & Valve Boxes

Controllers

Central Control

Drip

Drainage

Pumps & Filters

Industry Certified Products

Documentation

CAD & Drawings

Design Guides

Performance Charts

Design Resources

Pressure Loss Tables

Regulation

Training

Control Zone Kits

Features

Valve - 100PESBIVM
Filter type - Quick Check Basket Filter; 150 mesh (100 micron)
Flow Rate Capability (0.9 gph dripline with 12" emitter spacing) - 20 to 1300 ft (6 to 396m) of dripline
Valve box - Mini-Standard Rectangular
Warranty - 3yr Warranty
Controller compatibility -   
Compatible with traditionally-wired controllers   
Compatible with TBOS / DC controller when used with DC Latching solenoid
Compatible with IVM controllers (ESP-LXIVM/LXIVMP) when used with IVM SOL (shipped with this model)
Compatible with 2-wire decoder systems like ESP-LXD controller

Specifications

Operating flow range - 0.3 to 20.0 gpm; (1.13 to 75.7 l/m)
Min diagnostic flow - 3gpm
Inlet pressure - 15 to 150 psi; (1,0 to 10,3 bar)
Regulated pressure - 40 psi (2.8 bar)
Additional Specification Notes
* For flows below 5gpm Rain Bird recommends use of upstream filtration to prevent debris from collecting below the diaphragm

Dimensions

LxWxH - 14" Length
Inlet Size - 1" x 1"  NPT

Model Listing

XCZ100PRBLC

  • 1" Wide Flow Control Zone Kit for Light Commercial

    • XCZ100PRBCOM

  • 1" Wide Flow Control Zone Kit with Quick-Check Basket Filter

    • XCZ100PRBR

  • 1" Wide Flow Control Zone Kit (Non-Potable)

    • XCZ100IVMQ

  • 1" Wide Flow Control Zone Kit with IVM

    • Features

    Reliable Control Zone Kits that include the Low Flow Valve, the only valve on the market that can handle low flows (below 3 gpm) without weeping
    Complete, two-piece Control Zone Kits include the field-proven Low Flow Anti-Siphon Valve that has an atmospheric vacuum breaker for backflow prevention and an IAPMO rating
    These PR Filter kits provide on/off control, filtration, and pressure regulation with only two parts; so there is less chance of leakage at the connections, both at installation and over the life of the system

    Specifications

    Operating Range
    Flow: 0.20 to 5.0 gpm (0.8 to 18.9 l/m)
    Inlet pressure: 20 to 150 psi (1.4 to 10.3 bar)
    Filtration: 200 mesh stainless steel screen (75 micron)
    Regulated pressure: 30 psi (2.1 bar)
    Installation Note:
    When installing indoors or on a design where the emission points are more than 5ft. above the Control Zone Kit, you must install a check valve after the pressure regulating filter (RBY or Basket Filter).  The regulator has a permeable white dot that is designed to relieve excess pressure by slowly releasing water droplets.
    Filter must be installed downstream of any valve; warranty will be void if installed under constant pressure.

    Dimensions

    XACZ-075-PRF: 14" Height

    Model Listing

  • XACZ-075-PRF: 3⁄4" Low Flow Anti-Siphon Valve with 3⁄4" PR RBY Filter

    • Replacement Screen

  • RBY-200SSMX: (200 mesh stainless steel screen)

    • Features

    Reliable Control Zone Kits that include the Low Flow Valve, the only valve on the market that can handle low flows (below 3 gpm) without weeping
    Shorter kits with only two components (valve plus pressure-regulating filter) mean that you can fit more Control Zone Kits in a valve box, saving time and money
    These PR Filter kits provide on/off control, filtration, and pressure regulation with fewer components; so there is less chance of leakage at the connections, both at installation and over the life of the system

    Specifications

    Operating Range
    Flow:  XCZ-075-PRF: 0.2 to 5.0 gpm; (0.8 to 18.91 l/m) XCZ-LF-100-PRF: 0.2 to 10.0 gpm; (0.8 to 37.85 l/m)  
    Inlet pressure: 20 to 150 psi (1.4 to 10.3 bar)
    Regulated pressure:   XCZ-075-PRF - 30psi (2.1 bar) XCZ-LF-100-PRF - 40 psi (2.8 bar)
    Filtration: 200 mesh stainless steel screen (75 micron)Models

    Dimensions

    XCZ-075-PRF: 10" Length
    XCZLF-100-PRF: 10" Length

    Model Listing

  • XCZ-075-PRF: ¾" Low Flow Valve with ¾" PR RBY Filter (Assembled)
  • Flow: 0.2 to 5.0 gpm (0.8 to 18.91 l/m)
  • XCZLF-100-PRF: 1" Low Flow Valve with 1" PR RBY Filter (Assembled)
  • Flow: 0.2 to 10.0 gpm (0.8 to 37.85 l/m)

    • Replacement Screen

  • RBY-200SSMX: (200 mesh stainless steel screen)

    • Features

    Complete, two-piece Control Zone Kits include the field-proven ASVF valve which has an atmospheric vacuum breaker for backflow prevention and an IAPMO rating
    These PR Filter kits provide on/off control, filtration, and pressure regulation with only two parts; so there is less chance of leakage at the connections, both at installation and over the life of the system

    Specifications

    Operating Range
    Flow: 3.0 to 15.0 gpm (11.4 to 56.8 l/m)
    Inlet pressure: 20 to 150 psi (1.4 to 10.3 bar)
    Filtration: 200 mesh stainless steel screen (75 micron)
    Regulated pressure: 40 psi (2.8 bar)
    When installing indoors or on a design where the emission points are more than 5ft. above the Control Zone Kit, you must install a check valve after the pressure regulating filter (RBY or Basket Filter).  The regulator has a permeable white dot that is designed to relieve excess pressure by slowly releasing water droplets.
    Filter must be installed downstream of any valve; warranty will be void if installed under constant pressure

    Dimensions

    XACZ-100-PRF: 14" Height

    Model Listing

  • XACZ-100-PRF: 1" ASVF with 1" PR RBY Filter

    • Replacement Screen

  • RBY-200SSMX: (200 mesh stainless steel screen)

    • Features

    XCZPGA-100-PRF
    Reliable Control Zone Kit that includes an extra durable PGA valve
    These PR Filter kits provide on/off control, filtration, and pressure regulation with only two parts; so there is less chance of leakage at the connections, both at installation and over the life of the system
    2-wire compatible residential Control Zone Kit
    XCZ-100-PRF
    Shorter kits with only two components (valve plus pressure-regulating filter) mean that you can fit more Control Zone Kits in a valve box, saving time and money
    These PR Filter kits provide on/off control, filtration, and pressure regulation with only two parts; so there is less chance of leakage at the connections, both at installation and over the life of the system

    Specifications

    Operating Range
    Flow: 3 to 15 gpm (11.4 to 56.8 l/m)
    Inlet pressure: 20 to 150 psi (1.4 to 10.3 bar)
    Filtration: 200 mesh stainless steel screen (75 micron)
    Regulated pressure: 40 psi (2.8 bar)
    Installation Note:
    When installing indoors or on a design where the emission points are more than 5ft. above the Control Zone Kit, you must install a check valve after the pressure regulating filter (RBY or Basket Filter).  The regulator has a permeable white dot that is designed to relieve excess pressure by slowly releasing water droplets.
    Filter must be installed downstream of any valve; warranty will be void if installed under constant pressure.

    Model Listing

  • XCZPGA-100-PRF: 1" PGA Valve with 1" PR Filter  

  • XCZ-100-PRF: 1" DV Valve with 1" PR Filter (Assembled)*
  • *Available with BSP threads

    • Replacement Screen

  • RBY-200SSMX: (200 mesh stainless steel screen)

    • Features

    Industry wide flow range between 0.3 and 20 gpm (1.13 to 75.71 l/m) leading enables single SKU purchase for large projects
    Updated with the reliable, flexible and proven PEB valve with the rugged pressure regulating basket filter
    This PR Filter kit provides on/off control, filtration, and pressure regulation with only two parts; so there is less chance of leakage at the connections, both at installation and over the life of the system
    The “No Spill” feature of the basket filter ensures dirt does not fall back into the filter during cleanup operation. The threaded filter top with 0-ring makes it easy to remove and clean that stainless steel filter screen

    Specifications

    Operating Range
    Flow: 0.3 to 20 gpm (1.13 to 75.71 l/m)*
    Inlet Pressure: 15 to 150 psi (1,0 to 10,3 bar)
    Regulating Pressure: 40 psi (2,7 bar)
    Filtration: 200 mesh (75 micron) stainless steel
    Temperature: Up to 150 degree F (66 degree C)
    *For flows below 5 gpm Rain Bird recommends the use of upstream filtration to prevent debris from collecting below the diaphragm

    Model Listing

  • XCZ-100-PRB-LC: 1” PEB Valve with 1” Pressure Regulating (40 psi), Basket Filter

    • Replacement Filter Screens

  • QKCHK-100M: 100 mesh stainless steel screen, red
  • QKCHK-200M: 200 mesh stainless steel screen, white

    • Replacement Cap

  • BFCAP: (Complete cap with body o-ring)

    • Features

    Complete kit is the simplest, smallest and most reliable Control Zone Kit for commercial applications between 0.3 and 20 gpm (1.13 and 76 l/m)
    Includes the reliable, proven PESB Valve which provides patented scrubbing action, making this kit ideal for commercial dirty water applications
    Includes the Pressure Regulating, Quick-Check Basket Filter that has a clear indicator which goes from green to red, telling you when to clean the filter. This reduces maintenance and takes the guesswork out of cleaning the filter. In addition, the threaded top makes it easy to remove and clean the stainless steel screen
    Basket Filter and Pressure Regulator have been combined for one smaller Pressure Regulating, Quick-Check Basket filter that is 24% smaller than the previous unit

    Specifications

    Operating Range
    Operating Flow Range**: 0.3 to 20.0 gpm (1.13 to 75.7 l/m)*
    Inlet Pressure: 15 to 150 psi (1,0 to 10,3 bar)
    Regulating Pressure: 40 psi (2,8 bar)
    Filtration:  XCZ-100-PRBLC: Basket Filter; 200 mesh (75 micron) XCZ-100-PRBR: Basket Filter; 200 mesh (75 micron) XCZ-100-PRBCOM: Quick-Check Basket Filter; 200 mesh (75 micron)
    Temperature: Up to 150º F (66º C)
    * For flows below 5gpm Rain Bird recommends use of upstream filtration to prevent debris from collecting below the diaphragm

    Model Listing

  • XCZ-100-PRB-COM: 1" Ball Valve with 1" PESB Valve and 1" Pressure Regulating (40 psi), Quick-Check Basket Filter
  • XCZ-100-PRBR: 1" PESBR Valve and 1" Pressure Regulating (40psi) Basket Filter

    • Replacement Screens

  • FLOW120M: (120 mesh/125 micron stainless steel screen)
  • FLOW150M: (150 mesh/100 micron stainless steel screen)
  • FLOW200M: (200 mesh/75 micron stainless steel screen)

    • Replacement Cap

  • QKCHKCAP: (Complete cap with body o-ring

    • Features

    Higher Flow, Less Friction
    An industry‐leading flow range of 20‐62 gpm gives you unmatched versatility for commercial drip and spray irrigation applications
    With the highest maximum flow rate available, you can cover large zones while using fewer kits, saving money on every job
    Engineered to minimize friction loss, these kits preserve your water pressure in systems with a prescribed minimum PSI
    Convenience That's Ready to Go
    Ready out of the box, the 1.5" Commercial Control Zone Kit saves you and your crew valuable installation time on every job
    An intelligent, compact design provides easier access for maintenance and allows you to fit two kits into a jumbo valve box
    Reliability That's Built In
    Pre‐assembled units help to prevent mistakes that can occur during assembly
    Designed with fewer components, each kit minimizes the connection points in your system making it less susceptible to stress cracks
    Reclaimed water models (XCZ-150-LCDR) are engineered with components and materials that stand up to harsh chemicals
    Backed by a 3-year trade warranty, you can install each kit with confidence

    Specifications

    Flow Range: 20 to 62 gpm (75.7 l/min to 234.69 l/min)
    Inlet Pressure: 15 to 115 psi (1.03 to 7.9 bar)
    Regulated Pressure: 40 psi (2.8 bar)
    Filtration: 120 mesh (130 micron)
    Water Temperature: 33° F up to 110° F (0.5° C to 43° C)
    Ambient Temperature: 33° F up to 125° F (0.5° C to 52° C)
    Valve Type:
    XCZ-150-LCS: 1.5" PEB
    XCZ-150-LCDR: 1.5" PESB-R
    Power: 24 VAC 50/60 Hz (cycles/sec) solenoid
    Inrush Current: 0.41A (9.84 VA) at 50/60Hz
    Holding Current: 0.14A (3.43VA) at 50/60Hz
    Coil Resistance: 30-39 Ohms
    Two-wire compatible with ESP-LXD Decoders

    Dimensions

    XCZ-150-LCS: 15 1/4 " L x 5 3/4" W x 9½" H
    XCZ-150-LCDR: 18 1/2" L x 5 3/4" W x 9½" H

    Model Listing

  • XCZ-150-LCS: 1½" (3.81 cm) Stainless Steel Screen Filter, 120 Mesh (130 Micron); Surface Area: 42 in2 (270 cm2)
  • XCZ-150-LCDR: 1½" (3.81 cm) Disc Filter, 120 Mesh (130 Micron); Surface Area: 48 in2 (310 cm2)

    • Replacement Filters:

  • LGFC120MD: Replacement Disk Filter
  • LGFC120MS: Replacement Screen Filter

    • Features

    Allows the filter to be safely placed downstream of the valve since these valves handle all sizes of particles
    Unique “double-knife” diaphragm coupled with ½" diameter seat for flawless operation at low flow rates
    Low Flow Valve is available in ¾" In-line model
    Double-filtered pilot flow design for maximum reliability
    External bleed to manually flush the system of dirt and debris during installation and system start-up
    Internal bleed for spray-free manual operation

    Specifications

    Operating Range
    Flow: 0.20 to 10.0 gpm (0.6 to 37.8 l/m)
    Pressure: 15 to 150 psi (1.0 to 10.3 bar)
    Electrical Specifications
    24 VAC 50/60 Hz (cycles/sec) solenoid
    Inrush current: 0.30 (7.2 VA) at 60 Hz
    Holding current: 0.19 A (4.56 VA)

    Model Listing

  • LFV-075: ¾" Low Flow DV Valve
  • LFV-100*: 1" Low Flow DV Valve
  • * Available with BSP threads

    • Copyright © 2024 Rain Bird Corporation. All rights reserved.