Brass Valves

Features

Best-in-Class Valves
With industry-leading reliability and performance, the Rain Bird EFB-CP Series of commercial valves are now even better with preinstalled IVM-SOL
Next Generation Two-Wire System
The ESP-LXIVM Two-Wire Controller is the next leap forward—simplifying installation, improving reliability and enabling more troubleshooting features that save time
Performance and Reliability
With 50% fewer connections, an IVM Smart Valve is already 200% more reliable out of the box versus using a valve and decoder
Features
Reliable performance even in dirty water applications. Self-flushing filter resists debris build-up
Rugged red brass construction for longer life
Normally closed, reverse flow design ensures valve will fail in the closed position if a tear or rip in the diaphragm occurs. Prevents flooding, water waste and landscape damage
Slow closing to prevent water hammer and subsequent system damage
One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service
Manual internal bleed operates the valve without allowing water into the valve box. Allows pressure regulator adjustment without turning on the controller
Manual external bleed permits flushing debris from the system. Recommended for system start up and other repairs
Contamination-proof, self-flushing filter screen resists debris build-up. Water flow continuously flushes the screen, dislodging particles and debris before they can accumulate and clog the filter
Reclaimed water compatible: all models now feature EPDM diaphragms and chlorine-resistant parts as standard equipment
Options (order separately)
Accommodates optional, field installed PRS-D pressure regulating module to ensure optimum sprinkler performance
Optional purple flow control handle for non-potable water applications: P/N 236927, IVMEFBHANB

Specifications

Pressure: 15 to 200 psi (1.04 to 13.80 bar)
Flow with/without PRS-D: 5 to 200 GPM (1.14 to 45.40 m3/h; 0.32 to 12.60 l/s)
Temperature: up to 150° F (66° C)
Electrical Specifications
Power: 26.5 Vrms 50/60 Hz (cycles/sec)
Inrush current: <40mA (Peak)
Quiescent current: <0.4mA (ave.)
Voltage Range: 15.6 - 29.2 Vrms
Compatible with LXIVM controllers
Dimensions (H x L x W)
IVM100EFB: 6" x 4½" x 3¼" (8.3 cm) x (15.2 cm) x (11.4 cm) H x L x W
IVM150EFB: 6 ½" x 5½" x 4½" (11.4 cm) x (16.5 cm) x (14 cm) H x L x W
IVM200EFB: 7" x 6¾" x 5¾" (14.6 cm) x (17.8 cm) x (17.1 cm) H x L x W

Model Listing

  • IVM100EFB: 1" Brass Valve with IVM-SOL
  • IVM150EFB: 1½" Brass Valve with IVM-SOL
  • IVM200EFB: 2" Brass Valve with IVM-SOL
  • Features

    Reliable performance even in dirty water applications. Self-flushing filter resists debris build-up  
    Rugged red brass construction for longer life  
    Durable, fabric-reinforced diaphragm composed of EPDM, a rubber material which is chlorine and chemical resistant  
    Normally closed, reverse flow design ensures valve will fail in the closed position if a tear or rip in the diaphragm occurs. Prevents flooding, water waste and landscape damage  
    Slow closing to prevent water hammer and subsequent system damage  
    One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service  
    Manual internal bleed operates the valve without allowing water into the valve box. Allows pressure regulator adjustment without turning on the controller  
    Manual external bleed permits flushing debris from the system.Recommended for system start up and other repairs  
    Contamination-proof, self-flushing filter screen resists debris build-up. Water flow continuously flushes the screen, dislodging particles and debris before they can accumulate and clog the filter  
    Reclaimed water compatible: all models now feature EPDM diaphragms and chlorine-resistant parts as standard equipment  
    Three-year trade warranty

    Specifications

    Pressure: 15 to 200 psi (1.04 to 13.80 bar)  
    Flow with/without PRS-D: 5 to 200 GPM (1.14 to 45.40 m3/h; 0.32 to 12.60 l/s)  
    Temperature: up to 150° F (66° C)  
    Power: 24 VAC 50/60Hz (cycles/sec) solenoid power requirement  
    Inrush current: 0.21A (5.0 VA) at 50/60Hz  
    Holding current: 0.10A (2.4 VA) at 50/60Hz  
    Solenoid coil resistance: 45-55 Ohms (50 nominal)

    Dimensions

    100-EFB-CP: 6" x 4½" x 3¼" (8.3 cm) x (15.2 cm) x (11.4 cm) H x L x W   
    150-EFB-CP: 6 ½" x 5½" x 4½" (11.4 cm) x (16.5 cm) x (14 cm) H x L x W   
    200-EFB-CP: 7" x 6¾ " x 5¾" (14.6 cm) x (17.8 cm) x (17.1 cm) H x L x W

    Model Listing

  • 100-EFB-CP: 1"    
  • 150-EFB-CP: 1½"  
  • 200-EFB-CP: 2"
  • Features

    Unique hybrid construction featuring durable red brass body and glass filled nylon bonnet for long life at a value price  
    Normally closed, forward flow design  
    Slow closing to prevent water hammer and subsequent system damage  
    Robust solenoid provides dependable performance even during constant operation  
    Flow control handle adjusts water flows as needed and incorporates a brass thread insert for longer life  
    Manual internal bleed operates the valve without allowing water into the valve box. Allows pressure regulator adjustment without turning the valve on at the controller  
    Manual external bleed permits flushing debris from the system. Recommended for system start up and repairs  
    Highly efficient operation with extremely low pressure loss  
    Patented nylon scrubber scrapes a stainless steel screen to clean and break down grit and plant material. Prevents debris build-up and clogging  
    Three-year trade warranty
    Options
    Accommodates optional, field installed PRS-D pressure regulating module to ensure optimum sprinkler performance  
    Accepts latching solenoid for use with Rain Bird battery-operated controllers up to 10.35 bar  
    Compatible with ESP-LXD decoders

    Specifications

    Pressure: 20 to 200 psi (1.4 to 13.8 bar)  
    Flow with/without PRS-D option: 60 to 300 gpm (13.6 to 68.1 m3/h; 3.78 to 18.90 l/s)  
    Temperature: up to 140° F (60° C)  
    Power: 24 VAC 50/60 Hz (cycles/sec) solenoid  
    Inrush current: 0.41 A (9.8 VA) at 50/60Hz  
    Holding current: 0.14 A (3.43 VA) at 50/60Hz    
    Coil resistance: 30-39 Ohms, nominal

    Dimensions

    Height: 13 5/8" (34.61 cm)  
    Length: 8" (20.32 cm)   
    Width: 7" (17.78 cm)

    Model Listing

  • 300-BPES: 3" NPT