You Are Here: Home > Landscape Irrigation > Products > Drip Control Zone Components > Low Flow Control Zone Kits With PR Filter

Low Flow Control Zone Kits With PR Filter

Control Zone Components

Reliable Control Zone Kits that include the Low Flow Valve, the only valve on the market that can handle low flows (below (3gpm) without weeping.

Shorter kits with only two components (valve plus pressure-regulating filter) mean that you can fit more Control Zone Kits in a valve box, saving time and money.

These PR Filter kits provide on/off control, filtration, and pressure regulation with fewer components; so there is less chance of leakage at the connections, both at installation and over the life of the system.

Three-year trade warranty.

1" Low Flow Valve with 3/4" PR
RBY Filter

3/4" Low Flow Valve with 3/4" PR
RBY Filter (Assembled)


No Valve Kit, PR RBY Filter
and Fittings Only

200 Mesh Stainless Steel
Replacement Screen

Operating Range

  • Flow: 0.20 to 5.0 GPM (0.8 to 18.9 l/m)
  • Inlet Pressure: 20 to 150 psi (1.4 to 10.3 bar)
  • Regulated Pressure: 30 psi (2.1 bar)
  • Filtration: 200 mesh (75 micron)

Pressure Loss Chart

In order to supply 30 psi (2.1 bars) outlet pressure, additional pressure is needed at the inlet since there is some pressure loss from water flowing through the kit. The amount of pressure loss depends on the flowrate.

The charts below list the minimum inlet pressure required to supply 30 psi (2.1 bars) of outlet pressure.

Minimum Inlet Pressure for 30 psi Outlet Pressure
Flow (gpm) Inlet pressure (psi)
Inlet pressure (psi)
0.2 34.4 34.6
1.0 36.1 36.5
3.0 38.1 38.1
5.0 43.4 42.0


Minimum Inlet Pressure for 2.1 bar Outlet Pressure
Flow l/m Inlet Pressure (bar)
Inlet pressure (bar)
0.8 2.4 2.4
3.8 2.5 2.5
11.4 2.6 2.6
18.9 3.0 2.9