EFB-CP Series
Highly durable brass irrigation valves – globe configuration
Electric remote control valves don't come any better than EFB-CP Series red brass valves. Need a contamination-proof, self-flushing screen that cleans itself and resists debris build-up in dirty water? The EFB-CP's the one!
Ideal for non-potable water valve applications, the EFB-CP is designed to handle chlorine and other harsh chemicals found in reclaimed water systems.
EFB-CP Series valves offer long life and superior performance in high pressure applications.
Features
Reliable performance even in dirty water applications. Self-flushing filter resists debris build-up
Rugged red brass construction for longer life
Durable, fabric-reinforced diaphragm composed of EPDM, a rubber material which is chlorine and chemical resistant
Normally closed, reverse flow design ensures valve will fail in the closed position if a tear or rip in the diaphragm occurs. Prevents flooding, water waste and landscape damage
Slow closing to prevent water hammer and subsequent system damage
One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service
Manual internal bleed operates the valve without allowing water into the valve box. Allows pressure regulator adjustment without turning on the controller
Manual external bleed permits flushing debris from the system.Recommended for system start up and other repairs
Contamination-proof, self-flushing filter screen resists debris build-up. Water flow continuously flushes the screen, dislodging particles and debris before they can accumulate and clog the filter
Reclaimed water compatible: all models now feature EPDM diaphragms and chlorine-resistant parts as standard equipment
Three-year trade warranty
Specs
Pressure: 15 to 200 psi (1.04 to 13.80 bar)
Flow with/without PRS-D: 5 to 200 GPM (1.14 to 45.40 m3/h; 0.32 to 12.60 l/s)
Temperature: up to 150° F (66° C)
Power: 24 VAC 50/60Hz (cycles/sec) solenoid power requirement
Inrush current: 0.21A (5.0 VA) at 50/60Hz
Holding current: 0.10A (2.4 VA) at 50/60Hz
Solenoid coil resistance: 45-55 Ohms (50 nominal)
Dimensions
100-EFB-CP: 6" x 4½" x 3¼" (8.3 cm) x (15.2 cm) x (11.4 cm) H x L x W
150-EFB-CP: 6 ½" x 5½" x 4½" (11.4 cm) x (16.5 cm) x (14 cm) H x L x W
200-EFB-CP: 7" x 6¾ " x 5¾" (14.6 cm) x (17.8 cm) x (17.1 cm) H x L x W
