You Are Here: Home > Landscape Irrigation > Products > Drip Control Zone Components > Inline RBY Filter

Inline RBY Filter

Control Zone Components

Static filter helps prevent plugging in a drip irrigation system.

A simple and reliable filter for low-volume irritation systems.

Simple to clean, as cap has a sealing )-ring and unthreads to provide access to the filter element.

Strong and reliable due to its robust design and glass-filled polypropylene construction.

 


  • Male x Male threaded connections for direct connection to valves and pressure regulators.
  • Replacement filter element is available in 200 mesh (75 micron).
  • Three-year trade warranty.


RBY075MPTX
3/4" Inline RBY Filter
with 200 Mesh Screen


RBY100MPTX 
1" Inline RBY Filter
with 200 Mesh Screen*
   


RBY-200SSMX
200 Mesh Stainless Steel
Replacement Screen

  

*Available with BSP threads.

Operating Range

  • Flow:
    • 3/4" units: 0.20 to 12.0 GMP (0.8 to 45. l/m)
    • 1" units: 0.20 to 18.0 GPM (0.8 to 68.1 l/m)
  • Pressure: 20 to 150 psi (1.4 to 10.3 bar)
  • Filtration: 200 mesh (75 micron)

Pressure Loss Chart

In order to supply 40 psi (2.8 bars) outlet pressure, additional pressure is needed at the inlet since there is some pressure loss from water flowing through the kit. The amount of pressure loss depends on the flowrate.

The charts below list the minimum inlet pressure required to supply 40 psi (2.8 bars) of outlet pressure.

Pressure Loss Characteristics
Flow (gpm) RBY075MTPX (psi) RBY100MPTX (psi)
1.0 0.1 0.1
3.0 0.4 0.3
5.0 1.1 0.5
7.0 1.6 0.8
9.0 2.7 1.4
12.0 4.5 2.2
14.0 N/A 3.0
16.0 N/A 3.8
18.0 N/A 4.7

Metric

Pressure Loss Characteristics
Flow (l/m) RBY075MTPX (bar) RBY100MPTX (bar)
0.8 0.00 0.00
3.8 0.01 0.01
11.4 0.03 0.02
18.9 0.08 0.03
26.5 0.11 0.06
34.1 0.19 0.10
45.4 0.31 0.15
53.0 N/A 0.21
60.6 N/A 0.26
68.1 N/A 0.32