You Are Here: Home > Landscape > Products > Drainage > Drainage Pop-Up Valves

Drainage Pop-Up Relief Valves

Available in four configurations

A pop-up water relief valve (also commonly known as a pop-up drainage emitter) that is normally closed except when there is a build up of hydrostatic pressure. As the drainage pipes fill and build up slight pressure, the cover rises to allow the excess water to escape. Once the water is discharged the pressure drops and a stainless steel spring automatically retracts the cover to it's closed flush position. The flush design of the product ensures that it blends well into the surrounding area. It is manufactured from a structurally foamed High Density Polyethylene (HDPE) with a UV inhibitor to reduce sun damage. Typical application is at the discharge end of the drainage pipe. Can be installed in either a vertical or horizontal position.

Find an Authorized Rain Bird Drainage Distributor near you.

 

Model Connects To

9 inch square, 2 outlet basin
Drainage Pop-Up Valve
Model: DPUV0

 

3" or 4" S & D Fittings (SDR 35)

12 inch square 2 outlet basin
Drainage Pop-Up Valve with 3" PVC Elbow
Model: DPUV3E

 

3" S & D Pipe (ASTM D2729)
3" Triple Wall Pipe

12 inch square 4 outlet basin
Drainage Pop-Up Valve with 4" PVC Elbow
Model: DPUV4E

 

4" S & D Pipe (ASTM D2729 & D3034)
4" Triple Wall Pipe
12 inch square 4 outlet basin
Drainage Pop-Up Valve with 4" PVC Elbow and Adapter
Model: DPUV4EHUB
3" or 4" Corrugated Pipe
3" or 4" Triple Wall Pipe
3" or 4" S & D Pipe (ASTM D2729)
  • Available in four configurations
  • Pop-up valve body manufactured from structurally foamed High-Density Polyethylene (HDPE)
  • Elbow (where applicable) manufactured from PVC
  • Adapter (where applicable) manufactured from High Impact Polystyrene (HIPS)
  • UV stabilized to protect from sun degradation
  • Spring-loaded cover rises ½" to discharge excess water in system
  • Spring automatically retracts cover to closed position after excess water is discharged
  • Can be used in both vertical and horizontal position
  • Stainless steel spring to prevent rusting
  • PVC elbows (where applicable) include a ¼" drain hole to eliminate standing water
  • Made in the USA