1" Medium Flow Control Zone Kit w/ Anti-Siphon
Control Zone with Anti-Siphon
The 1" Medium Flow Control Zone Kit w/ Anti-Siphon is a combination zone that operates a medium flow residential system, and also provides critical back-flow prevention function to prevent cross contamination of indoor water.
- Industry Leading: Incorporates all features of DV/DVF Series valves.
- Anti-Siphon: The Low Flow Anti-Siphon Valve has an atmospheric vacuum breaker for backflow prevention and an IAPMO rating.
- Compact solution: The pressure regulating RBY filter provides the protection of downstream components you need in a low-volume system, in a compact design.
Features
Valve - 100ASV
Filter type - Stainless steel screen filter; 200 mesh (75 micron)
Flow Rate Capability
(0.9 gph dripline with 12" emitter spacing) - 200 to 1000 ft (61 to 304m) of dripline
Valve box - Above Ground
Warranty - 3yr Warranty
Controller compatibility -
Compatible with traditionally-wired controllers
Compatible with TBOS / DC controller when used with DC Latching solenoid
Compatible with IVM controllers (ESP-LXIVM/LXIVMP) when used with IVM SOL
Not compatible with 2-wire decoder systems like the ESP-LXD controller
Specs
Operating flow range - 3.0 to 15.0 gpm; (11.4 to 56.8 l/m)
Min diagnostic flow - N/A
Inlet pressure - 20 to 150 psi; (1.4 to 10.3 bar)
Regulated pressure - 40 psi (2.8 bar)
Additional Specification Notes
When installing indoors or on a design where the emission points are more than 5ft. above the Control Zone Kit, you must install a check valve after the pressure regulating filter (RBY or Basket Filter). The regulator has a permeable white dot that is designed to relieve excess pressure by slowly releasing water droplets.
Filter must be installed downstream of any valve; warranty will be void if installed under constant pressure
Dimensions
LxWxH - 14" Height
Inlet Size - 1" x 1" NPT
Model Comparison
XCZ075PRF
XCZLF100PRF
Related Documents
Related Products
Control Zone with Anti-Siphon, Optimized for the lowest flow