You Are Here: Home > Landscape Irrigation > Products > Drip Control Zone Components > 1.5 Inch Inline Control Zone Kits

1.5" Inline Control Zone Kit

Bring Big Savings to Larger Zones

Delivering a flow rate up to 62 gpm—the highest in its category—and a design that minimizes friction loss, the 1.5" Inline Control Zone Kit gives you versatility to take on larger zones. It's the best option to save time and money when installing commercial drip or spray irrigation.  

Simplified Installation
An all-in-one design provides the on/off control, filtration and pressure regulation you need while saving installation time. Plus, its inline design allows you to fit two kits into each jumbo valve box.

Increased Reliability
A pre-assembled unit with fewer components leads to a reduction in vulnerable connection points and fewer chances of the kit being assembled incorrectly. A reclaimed water model (XCZ-150-LCDR) engineered with components and features that stand up to harsh chemicals is also available.

Unbeatable Value
With a higher flow capacity, you can cover larger zones with a single kit, cutting material and labor costs while delivering the proven performance from the market leader in control zone kits.  

Higher Flow, Less Friction

  • An industry‐leading flow range of 15‐62 gpm gives you unmatched versatility for commercial drip and spray irrigation applications.
  • With the highest maximum flow rate available, you can cover large zones while using fewer kits, saving money on every job.
  • Engineered to minimize friction loss, these kits preserve your water pressure in systems with a prescribed minimum PSI.

Convenience That's Ready to Go

  • With an all‐in‐one design, the 1.5" Inline Control Zone Kit saves you and your crew valuable installation time on every job.
  • An intelligent, compact design provides easier access for maintenance and allows you to fit two kits into jumbo valve boxes.

Reliability That's Built In

  • Pre‐assembled units help to prevent mistakes that can occur during assembly.
  • Designed with fewer components, each kit minimizes the connection points in your system making it less susceptible to stress cracks.
  • Reclaimed water models (XCZ-150-LCDR) are engineered with components and materials that stand up to harsh chemicals.
  • Backed by a 3-year trade warranty, you can install each kit with confidence.


XCZ-150-LCS Standard Kit 

 


XCZ-150-LCDR Reclaimed Kit 

 

   


Stainless Steel Filter


Disc Filter

Operating Range

  • Flow Range: 15 to 62 gpm (56.8 to 234.7 l/m)
  • Inlet Pressure: 15 to 115 psi (1.03 to 7.9 bar)
  • Regulated Pressure: 40 psi (2.8 bar)
  • Filtration: 120 mesh (130 micron)
  • Filtering Surface:
    • Disc: 83 in2 (535 cm2)
    • Screen: 76 in2 (490 cm2)
  • Temperature: 33° up to 110°F (0.5° to 43°C)
  • Dimensions:
    • XCZ-150-LCS: 20-3/4" L x 5-3/4" W x 9-1/2" H
    • XCZ-150-LCDR: 23-1/2" L x 5-3/4" W x 9-1/2" H
  • Filtration:
    • XCZ-150-LCS: 11/2" (3.81 cm) Stainless Steel Screen Filter, 120 Mesh (130 Micron)
    • XCZ-150-LCDR: 11/2" (3.81 cm) Disc Filter, 120 Mesh (130 Micron)
  • Valve Type:
    • XCZ-150-LCS: 1.5" PEB, Globe Valve
    • XCZ-150-LCDR: 1.5" PESB-R, Scrubber Globe Valve
  • Power: 24 VAC 50/60 Hz (cycles/sec) solenoid, two-wire compatible

XCZ-150-LCS

Minimum Inlet Pressure for 40 psi (2.8 bar) Outlet Pressure
Flow Rate (gpm) Inlet Pressure (psi) Inlet pressure (bar)
15 43 2.96
20 43 2.96
25 43 2.96
30 45 3.10
40 46 3.17
50 51 3.52
60 55 3.79
70 56 3.86

XCZ-150-LCDR

Minimum Inlet Pressure for 40 psi (2.8 bar) Outlet Pressure
Flow Rate (gpm) Inlet Pressure (psi) Inlet pressure (bar)
15 42 2.89
20 42 2.89
25 43 2.96
30 43 2.96
40 46 3.17
50 48 3.31
60 48 3.31
70 48 3.31