Rain Bird XF™ Series Dripline is the latest innovation in the Rain Bird Xerigation® family. Because it is the most flexible, kink-resistant tubing available, it’s ideal for irrigating areas where traditional drip tubing is difficult to install. XF™ dripline is perfect for small, narrow and tight planting areas, as well as areas with tight curves or many switchbacks.
Because it accepts 17mm insert fittings, XF™ Series Dripline Insert Fittings, Rain Bird Easy-Fit compression fittings and LOC fittings makes it easier than ever to design with, and install Rain Bird dripline.
XF™ Series Dripline is simple, reliable and durable.
Features
Simple
Unique material offers significantly greater flexibility and kink-resistance for fast, easy installation.
The bend radius for XF™ dripline is 3" no matter which way you bend the tube. Other driplines will bend 4" if bending with the natural curve of the coil and only 7" if bending against the natural curve of the coil.
Greater flexibility assures design capability of tight curves and spaces.
Accepts Rain Bird Easy Fit compression fittings, XF™ Series Dripline insert fittings, 17mm insert fittings and LOC fittings.
Variety of flow rates, spacing and coil lengths provides design flexibility for a number of nonturfgrass applications.
Reliable
The pressure-compensating emitter design provides a consistent flow over the entire lateral length ensuring higher uniformity for increased reliability in the pressure range of 8.5 to 60 psi.
Durable
Dual-layered tubing (brown over black) provides unmatched resistance to chemicals, algae growth and UV damage.
Operating Range
Pressure: 8.5 to 60 psi
Flow rates: 0.6 and 0.9 gph
Temperature:
Water: Up to 100°F
Ambient: Up to 125°F
Required Filtration: 120 mesh
Specifications
OD: 0.634"
ID: 0.536"
Thickness: 0.049"
12", 18", 24" spacing
Available in 100', 250' and 500' coils
Models
XFD-06-12-100
XFD-06-12-250
XFD-06-12-500
XFD-06-18-100
XFD-06-18-250
XFD-06-18-500
XFD-06-24-100
XFD-06-24-250
XFD-06-24-500
XFD-09-12-100
XFD-09-12-250
XFD-09-12-500
XFD-09-18-100
XFD-09-18-250
XFD-09-18-500
XFD-09-24-100
XFD-09-24-250
XFD-09-24-500
Specifications
The flexible polyethylene tubing shall have factory installed pressure-compensating, inline emitters installed every 12-24 inches. The flow rate from each installed inline emitter shall be 0.6 or 0.9 gallons per hour when inlet pressure is between 8.5 and 60 psi.
The inline emitter diaphragm shall have a pressure-regulating diaphragm with a spring action allowing it to self-rinse if there is a plug at the outlet hole. The bend radius shall be 3 inches whether bending the tubing with the natural bend of the coil or against it.
The inline emitter inlet shall be raised off the inside tube wall to minimize dirt intrusion. The XF™ Series Dripline inline tubing shall be manufactured by Rain Bird Corporation, Azusa, California.
Tech
Specs
