CPF
Automatic Sprinkler Valve with Flow Control

RainBird manufactures only the highest quality In-Line valves. Use In-Line valves in locations where the use of a pressure vacuum breaker (PVB) or a double-check valve is required by city codes to protect against back flow. Check your local city codes to determine what type of valves are required. In-Line valves are installed below ground in a valve box down stream from the main line from a PVB or doublecheck valve. In-Line valves will not prevent back flow on their own, they need the help of a back flow prevention device.

Features and Benefits:

• Easy-to-turn, pressure assisted flow control mechanism.
• Energy efficient, low power encapsulated solenoid with captured plunger.
• Buna-N diaphragm with captive spring for extended valve life and reliability.
• Reverse Flow design reduces stress on diaphragm for dependable operation.
• External bleed to manually flush system of dirt and debris during installation and system start-up.
• Electrical specification: 24 VAC, 50/60 Hz.; Inrush: .30 amps;
  Holding: .19 amp.
• Spray-free internal bleed for manual operation.
• In-line design minimizes pressure loss.
• Works with any stainless steel screws.
• Designed for below-ground installation, out of sight and away from playful hands.

Models:

• CPF-075 - 3/4-inch female pipe thread (FPT) inlet and outlet
• CPF-100 - 1 inch female pipe thread (FPT) inlet and outlet.
• CP-100-SS - 1-inch slip-slip connection inlet and outlet.