ET Manager™ Cartridge

Outsmart Mother Nature.

The Rain Bird® ET Manager™ Cartridge easily upgrades the ESP-LXD Controller or ESP-LXME Decoder Controller to an ET/Weather-based irrigation smart controller. The ET Manager Cartridge uses the same Weather Reach™ signal as the Rain Bird® ET Manager (ETMi).

The ET Manager Cartridge saves water by making real-time adjustments to the irrigation schedule based on hourly weather information. Additionally, by eliminating the need to travel to controller sites to make adjustments or programming changes, the ET Manager Cartridge contributes to significant labor savings.

The ET Manager Cartridge is ideal for high-end residential and light commercial applications. The ET Manager Cartridge is easily installed in any ESP-LX Series controller with minimal need for tools or wiring.

Water Saving Benefits

Water Savings of 20 – 50% over traditional time based irrigation control.
Rain interrupt to prevent irrigation during rain events.
Wind interrupt prevents overspray during high-wind conditions.
Four separate moisture balances are maintained. One for each program or hydrozone to efficiently water varied plant types (example: turf, shrubs, trees, annuals, etc).

Easy Installation

ET Manager Cartridge easily mounts in any ESP-LX controller.
Antenna mounts on controller or remotely (remote antenna kit required).
Setup Wizard walks user through all key setup parameters.

Reduced Liability

Minimum temperature interrupt to prevent irrigation during freezing conditions reducing liabilities associated with walkway icing.

ETC-LX Features

Upgrade an ESP-LX Controller to ET/Weather based irrigation control.
Modular ET Manager Cartridge snaps into dedicated bay on back of controller faceplate.
Installs in seconds with no tools.
Ribbon cable connects ETC-LX cartridge to the controller.
Antenna cable connects with snap in connector.
Status LEDs show current status of communication.
ETC-LX kit includes ET Manager Cartridge, receiver antenna, scheduling software CD and manual.

Sensors and Accessories

ET Manager Cartridge incorporates a rain gauge input, for optional local rainfall measurement. Rain Bird offers the ETM-RG tipping bucket rain gauge as an accessory to the ET Manager Cartridge. The tipping rain gauge is an ideal complement to the ET Manager Cartridge, this electronic gauge accurately measures rain to 1mm per tip, reducing run-off from over-watering and avoiding landscape damage. The rain gauge is durable, weatherproof, and resists UV and extreme temperatures. Measurements per tip are accurate, with a maximum +/- 2% deviation. Each gauge includes a 30’ cable.
Rain Bird offers a remote mounting kit, ETMRMK, so that the antenna can be remotely mounted to improve signal reception or remotely locate the antenna to prevent vandalism. The kit contains a 30’ (9,1 m) cable, connector and junction box. The cable must be installed in conduit for outdoor applications.

ET Manager Programming Software

The Rain Bird® ET Manager Programming Software (ETMPS) uses your personal computer to simplify ET Manager programming. This application allows the user to transfer ET Manager Scheduler settings directly from the PC to an ET Manager Cartridge via a USB cable. Additional functions of the ET Manager Programming Software:

Conveniently program all settings.
Quickly program multiple ET Managers.
Review ET Manager programming history.
Integrate with ET Manager Scheduler Application.
Print a programmed settings report.
Access ET Manager diagnostic tools.
Save commonly used program settings for future use.

Weather Reach™ Signal

Weather Reach Signal providers are available in the US and Canada. Visit the WRSP page to find a local signal provider. For more information contact the ET Manager hotline at 1-877-351-6588.

Rain Bird® ESP-LXME Controller

Fully compatible with the ET Manager Cartridge, the Traditionally Wired ESP-LXME Enhanced Controller offers optional flow sensing and management with modular station capacity from 8 to 48 stations. Learn more about the ESP-LXME Controller.

Rain Bird® ESP-LXD Decoder Controller

Combine the ET Manager with the ESP-LXD Controller to deliver powerful ET Management for larger commercial sites. Expandable for up to 200 stations, ESP-LXD combines Extra Simple Programming with an efficient 2-wire path. Flow Management is also built in to every ESP-LXD. Learn more about the ESP-LXD Decoder Controller.

Operating Specifications

Electrical power is provided by the ESP-LX Modular
Operating Temperature Range: 5˚F - 149˚F (Radio reception operating temperature: 32˚F - 122˚F)
Tipping Rain Gauge wire: 18 – 26 awg

Model/Description

ETCLX: ET Manager™ Cartridge for ESP-LX Series Controllers

Downloads

ET Manager Cartridge Tech Spec – English
Get to know this water-saving cartridge’s benefits, features, dimensions and other key information, including how to specify.

ET Manager Cartridge User Manual – English
Find everything you need to know about the ET Manager Cartridge, including how to install, program and troubleshoot this powerful water management tool.

ET Manager Specification Guide
Consult this comprehensive guide for help specifying the ET Manager Cartridge, ET Manager and other weather-base water management tools.

ExactET Case Study
Learn how Rain Bird® ET Management helped ExactET, a Canada-based water manager, save its customers thousands.

ET Manager Software & Accessories
Discover how the ET Manager Scheduler (free with the ET Manager Cartridge), along with a host of weather-based accessories, can help you unlock the full potential of this powerful cartridge.

Become a Weather Reach Commercial Signal Provider
Learn how becoming a Commercial Signal Provider can reinforce your reputation as an irrigation expert, while also providing you with a lucrative new business opportunity.

Become a Weather Reach Public Signal Provider
Learn how becoming a Public Signal Provider can provide your ET Manager Cartridge with the most accurate weather data and allow your agency to perform a vital public service.

See All Literature